One of the most frequent mistakes in packaging is selecting a box without measuring. Although the box might be perfectly acceptable for display, the product will migrate within the box during stacking and delivery even if an extra bit of void is present.

That is what one needs to understand that box measurement is about a lot more than just length, width and height. It’s all about fit, padding and safe delivery.

This blog explains the right way to measure box dimensions, so let’s get started.

What are three box dimensions?

When measuring a box, it’s important to check the inside dimensions, including length, width and height. These measurements help you understand the actual space available inside the box so you can make sure the product fits properly.

  • Length: The longest side of the box opening.
  • Width: The shorter side across the box opening.
  • Height: The space from the bottom of the box to the top.

In packaging, these are usually written as length x width x height so the size is easy to understand before choosing or ordering a box.

Tools Required to Measure a Box Dimensions

Using the right tools helps you avoid the wrong measurements especially when ordering custom packaging boxes.

Here are the tools required to measure a box dimension:

  • Measuring tape
  • Ruler

How to measure a box step-by-step?

Measuring a box is simple if you perform the calculation in the correct order (Length x Width x Height).

You need the same unit on each side like inches or centimeters and it is important to measure from one inside edge to the other for product fit:

Step 1: Measure the Length

Start with the longest side of the box opening. This is usually called the length and is written first in box dimensions. Place the measuring tape from one inside edge to the opposite inside edge. Make sure the tape stays straight, not angled because even a small mistake can affect the final box size.

Step 2: Measure the Width

Use the tape to measure the smaller side of the box opening. This is the width, which is after the length. The width will help you determine the amount of side to side space this product will take within the box. If it’s too narrow, it might be too restricted. If wider, product damage might result during delivery.

Step 3: Measure the Height

Lastly, measure from the bottom of the box to the top of the box. This is the height or depth (the end result) and is written last. When all three sides have been measured. This is to be written (Length x Width x Height).

For instance, a box labeled 12″ × 8″ × 6″ means it is 12 inches long, 8 inches wide, and 6 inches tall.

How to calculate the box volume?

Box volumes help to determine space available in the box. It’s helpful when you need to try product fit, deciding your cushioning or just to compare box sizes.

To calculate box volume. Multiply the length x width x height

Formula:

Length × Width × Height = Box Volume

For example, if a box is 12 inches long, 8 inches wide and 6 inches high, the volume will be:

12″ × 8″ × 6″ = 576 cubic inches

Always use the same unit for all three measurements. If you measure in inches, the answer will be in cubic inches. If you measure in centimeters, the answer will be in cubic centimeters.

Why box measurements matter in packaging?

Box measurement is important because it will determine what box size you select. An appropriately sized box provides adequate product protection, minimizes empty space, shipping costs and additional packaging waste.

Here are some reasons why correct box measurements are important:

  • Product Stays Safer: Product must be contained in the box and will not squeeze out. Excessive air pockets allow the device to roll around during transit.
  • Less Chance of Damage: Damage can take place if the box is in good shape but the product inside has some space to move.
  • Lower Shipping Cost: However, a larger box is not necessarily more protective. It may add to shipping cost because carriers may charge the cost of space utilized by the parcel.
  • Less Packaging Waste: If the packaging box is too large, the need for additional paper, bubble wrap and padding will increase which means more waste is created.
  • Better Storage and Delivery: The right sized box is also easier to stack up, store and transport throughout the shipping process.

Common Box Measuring Mistakes to Avoid

One might think selecting a box is easy, but an incorrect size can lead to product damage, increased expenses and frustrating unboxing after the product is handled and shipped. Here are the common box measuring mistakes to avoid:

Ignoring extra space inside the box: All the extra space in the box could allow the product to move during delivery, which can lead to damage and the need for additional filling materials.

  • External vs Internal dimension: External dimensions reflect the thickness of the cardboard and Inner dimensions highlight the actual product cushioning space.
  • Choosing a much bigger box: Boxes can be too big and that can wear down on the amount of movement, filler and shipping.
  • Not considering protective cushioning: If it does not take into account protective materials, there will be no space for bubble wrap, foam inserts or paper padding.
  • Using standard boxes when custom boxes are needed: Standard size boxes simply aren’t a good fit for every product, particularly when a special shape or packaging requirement is involved.

How correct box size improves product protection?

A strong box is useful but size matters just as much. In packaging, many damaged items are not caused by weak boxes. They are caused by products moving inside the box or being packed too tightly.

Here are the ways a correctly sized box help protect the product from packing table to customer’s door:

  • When the box fits well, the product stays in one place instead of sliding around during delivery.
  • The right size gives enough room for padding without making the parcel bulky.
  • It helps protect corners, edges and fragile parts from pressure during handling.
  • A proper sized box is easier to stack and carry which lowers the chance of crushing.
  • It also gives customers a better unboxing experience because the product arrives neat and secure.

Frequently Asked Questions

How do you measure box dimensions?

The box should be measured like this: first length, second width and third height. Measure all sides in units of the same size such as inches or centimetres.

What is the correct order for box dimensions?

The proper order used is length × width × height. Length is first, width is second and height is last.

Why are inside dimensions important?

Inside dimensions indicate actual inside dimensions of the box for use. This will enable you to find out whether the product and cushion will fit correctly.

What mistake should I avoid when measuring a box?

Avoid measuring at an angle or mixing units. Also, do not forget to leave space for protective cushioning.